EnAV RECEIVERTX-NR5010TX-NR3010Instruction ManualContentsSafety Information and Introduction ...2Table of Contents...
Safety Information and IntroductionEn-10sFor detailed information, see the pages in parentheses.a Speaker/channel indicatorsb Z2 (Zone 2) indicator (8
Controlling Other ComponentsEn-100You can program the remote controller’s ACTIVITIES to perform a sequence of remote control actions.Example:To play a
En-101AppendixTroubleshootingIf you have any trouble using the AV receiver, look for a solution in this section. If you can’t resolve the issue yourse
AppendixEn-102 Only the front speakers produce sound Only the center speaker produces sound The surround speakers produce no sound The center spea
AppendixEn-103 About DTS signals The beginning of audio received by an HDMI IN can’t be heard There’s no sound during Whole House Mode There’s no
AppendixEn-104 The remote controller doesn’t work Can’t control other components Can’t learn commands from another remote controller There’s no so
AppendixEn-105 There’s no sound The Zone 2/3 speakers produce no sound Can’t access the server or Internet radio Playback stops while listening to
AppendixEn-106 When performing Automatic Speaker Setup, the measurement fails and the message “Ambient noise is too high.” is displayed. The followi
AppendixEn-107Firmware UpdateTo update the firmware of the AV receiver, you can choose from the following two methods: update via network, or update v
AppendixEn-108Update Procedure TroubleshootingCase 1:If an error occurs, “Error!! *-**” is displayed on the AV receiver’s display. (Alpha-numeric char
AppendixEn-109The AV receiver allows you to update the firmware using a USB device.Note• Never unplug or turn off the AV receiver during the update pr
Safety Information and IntroductionEn-11a RS232 portTerminal for control.b DIGITAL IN COAXIAL and OPTICAL jacksc USB portd ETHERNET porte u REMOTE CON
AppendixEn-110TroubleshootingCase 1:If an error occurs, “Error!! *-**” is displayed on the AV receiver’s display. (Alpha-numeric characters on the fro
AppendixEn-111Connection Tips and Video Signal PathThe AV receiver supports several connection formats for compatibility with a wide range of AV equip
AppendixEn-112 “Monitor Out” set to “Analog”Video input signals flow through the AV receiver as shown, with composite video and PC IN (Analog RGB) so
AppendixEn-113Audio components can be connected by using any of the following audio connection formats: analog, optical, coaxial, or HDMI.When choosin
AppendixEn-114The following tables show how video signals at different resolutions are output by the AV receiver.NTSC/PAL✔: Output availables*1Availab
AppendixEn-115Using an RIHD-compatible TV, Player, or Recorderp, which stands for Remote Interactive over HDMI, is the name of the system control func
AppendixEn-116 How to connect and setup1Confirm the connection and settings.1. Connect the HDMI OUT MAIN jack to the HDMI input jack of the TV.2. Con
AppendixEn-117About HDMIDesigned to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface s
AppendixEn-118Network/USB FeaturesThe following diagram shows how you can connect the AV receiver to your home network. In this example, it’s connecte
AppendixEn-119 Server playbackThe AV receiver can play digital music files stored on a computer or media server and supports the following technologi
Safety Information and IntroductionEn-12Remote ControllerFor detailed information, see the pages in parentheses.a 8 RECEIVER button (26)b ACTIVITIES b
AppendixEn-120For server playback and playback from a USB device, the AV receiver supports the following music file formats.Variable bit-rate (VBR) fi
AppendixEn-121License and Trademark Information“x.v.Color” is a trademark of Sony Corporation. Manufactured under license under U.S. Patent No’s: 5,9
AppendixEn-122Specifications(TX-NR5010)Amplifier SectionVideo SectionTuner SectionGeneral HDMI Video Inputs Video Outputs Audio Inputs Audio Outp
AppendixEn-123Specifications(TX-NR3010)Amplifier SectionVideo SectionTuner SectionGeneral HDMI Video Inputs Video Outputs Audio Inputs Audio Outp
2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPANTel: 072-831-8023 Fax: 072-831-8163http://www.onkyo.com/18 Park Way, Upper Saddle River, N.J. 07
Using Internet RadioEn-1Using Internet RadioNote• Available services may vary depending on the region.Common Procedures in Internet Radio Menu1Press N
Using Internet RadioEn-2Pandora is a free, personalized Internet radio service that plays the music you know and helps you discover music you’ll love.
Using Internet RadioEn-3Using Rhapsody (U.S. only)1Use q/w to select “Sign in to your account” and then press ENTER.To use Rhapsody, you need an accou
Using Internet RadioEn-4Your Onkyo AV receiver includes a free trial of SiriusXM Internet Radio. The “Account Info” screen shows how many days are lef
Using Internet RadioEn-5Last.fm is a music service that learns what you love...Your new Onkyo AV receiver is very clever. If you have a free Last.fm a
En-13ConnectionsConnecting the AV ReceiverSpeaker ConfigurationThe following table indicates the channels you should use depending on the number of sp
Using Internet RadioEn-6Using Slacker Personal Radio1If you do not have an account, create one on the Slacker website (www.slacker.com) with your comp
Using Internet RadioEn-7Listen to your music collection on your home stereo in complete digital fidelity without a personal computer plus safely backu
Utilisation d’une webradioFr-1Utilisation d’une webradioRemarque• Les services disponibles peuvent varier en fonction de la région.Procédures courante
Utilisation d’une webradioFr-2Pandora est un service de radio en ligne libre et personnalisé vous permettant de lire la musique que vous connaissez et
Utilisation d’une webradioFr-3Utilisation de Rhapsody (Etats-Unis uniquement)1Utilisez q/w pour sélectionner « Sign in to your account », puis appuyez
Utilisation d’une webradioFr-4Votre ampli-tuner AV Onkyo comprend un essai gratuit de SiriusXM Internet Radio. L’écran « Account Info » affiche le nom
Utilisation d’une webradioFr-5Last.fm un service de musique qui apprend ce que vous aimez…Votre nouvel ampli-tuner AV Onkyo est très intelligent. Si v
Utilisation d’une webradioFr-6Utilisation de Slacker Personal Radio1Si vous ne possédez pas de compte, créez-en un à partir du site Web de Slacker (ww
Uso de Internet RadioEs-1Uso de Internet RadioNota• Los servicios disponibles pueden variar de una región a otra.Procedimientos comunes en el menú Int
Uso de Internet RadioEs-2Pandora es un servicio de radio por Internet gratuito y personalizado que reproduce la música que usted conoce y le ayudará a
ConnectionsEn-14 11.2-channel playbackBy using a combination of the built-in power amplifier for 9-channel and an external power amplifier for 2-chan
Uso de Internet RadioEs-3Uso de Rhapsody (sólo EE.UU.)1Utilice q/w para seleccionar “Sign in to your account” y luego pulse ENTER.Para utilizar Rhapso
Uso de Internet RadioEs-4Su receptor de AV Onkyo incluye una prueba gratuita de SiriusXM Internet Radio. La pantalla “Account Info” muestra los días q
Uso de Internet RadioEs-5Last.fm es un servicio musical que sabe lo que le gusta...Su nuevo receptor de AV Onkyo es muy inteligente. Si tiene una cuen
Uso de Internet RadioEs-6Uso de Slacker Personal Radio1Si no tiene una cuenta, cree una en el sitio web de Slacker (www.slacker.com) con su ordenador.
SN 29401189B(C) Copyright 2012 Onkyo Sound & Vision Corporation Japan. All rights reserved.Y1203-2* 2 9 4 0 1 1 8 9 B *
En-1Using Internet RadioUsing Internet RadioNote• Available services may vary depending on the region.Common Procedures in Internet Radio Menu1Press N
Using Internet RadioEn-2Last.fm is a music service that learns what you love...Your new Onkyo AV receiver is very clever. If you have a free Last.fm a
Internetradio verwendenDe-1Internetradio verwendenAnmerkung• Die verfügbaren Dienste sind länderabhängig verschieden.Allgemeine Verfahren bei den Inte
Internetradio verwendenLast.fm ist ein Musikdienst, der sich Ihre Lieblingsmusik merkt... Ihr neuer Onkyo AV-Receiver ist äußerst clever. Wenn Sie ein
Remote Control Codes1Remote Control Codes/1While holding down the REMOTE MODE button to which you want to assign a code, press and hold down [DISPLAY]
ConnectionsEn-15• Don’t connect more than one cable to each speaker terminal. Doing so may damage the AV receiver.• Don’t connect one speaker to sever
Remote Control Codes2Codes de télécommande Códigos de control remoto1Tout en maintenant enfoncé le bouton REMOTE MODE auquel vous souhaitez associer u
Remote Control Codes3Codici del telecomando Fernbedienungscodes1Tenendo premuto il tasto REMOTE MODE al quale si desidera assegnare il codice, premere
Remote Control Codes4Afstandsbedieningscodes Fjärrstyrningskoder1Houd terwijl u de REMOTE MODE toets ingedrukt houdt waarvoor u een code wilt toewijze
Remote Control Codes5遙控代碼 遥控代码1在按住想指定編碼的 REMOTE MODE (遙控模式)按鈕時,同時按住 [DISPLAY] (顯示)(約 3 秒)。REMOTE MODE (遙控模式)按鈕 / 遙控指示燈亮起。在 Integra 系列產品上,按鈕名稱為大寫。 例如,「
Remote Control Codes6Dedicated Onkyo ReceiverDefault 62503Zone 2 62506Zone 3 62507Cable Set Top BoxADB 02254, 02769Aon 02769Arris 02187AT&T 00858B
Remote Control Codes7AT&T 00858BT Vision 02294Cisco 00858, 02345, 02378Kreatel 01385Motorola 00858, 02378Neuf TV 03107Philips 02294Scientific Atla
Remote Control Codes8Polk Audio 82228Video - AccessoryADB 02254, 02769Aon 02769Apple 02615AT&T 00858BT Vision 02294Canal+ 02657Cisco 00858, 02345,
Remote Control Codes9Hama 01567Hanseatic 01100Hirschmann 00173Hitachi 01284Hornet 01300HTS 00775Humax 01377, 01176, 01427, 01675, 01808, 01882, 01915,
Remote Control Codes10Star 00887Stream System 01300Strong 00853, 00879, 01284, 01300, 01409, 01626, 02418Sunny 01300Sunstar 00642Supernova 00887Suprat
Remote Control Codes11Akai 10178, 10556, 10037, 10714, 10715, 10208, 11675Akiba 10037Akito 10037Akura 10171, 10037, 10714, 10668, 11037, 11363, 11585,
ConnectionsEn-16 Speakers A: 5.2-channel playbackSpeakers B: 2.1-channel playback with bi-amped front speakersIn this example, Speakers A provides 5.
Remote Control Codes12Erres 10037ESA 10171ESC 10037Euroman 10037Europa 10037Europhon 10037Evesham 11248, 11667Excello 11037Exquisit 10037Ferguson 1003
Remote Control Codes13Lifetec 10037, 10714, 10668, 11037, 12001Linsar 11585Local India TV 10208Local Malaysia TV 10698Lodos 11037Loewe 10037, 10512, 1
Remote Control Codes14Phoenix 10037Phonola 10556, 10037Pioneer 10037, 10698, 10512, 11457, 11636, 12171Plantron 10037Playsonic 10037, 10714, 10715, 11
Remote Control Codes15Technosonic 10556, 10625, 10499, 11324Techvision 11709Techwood 11037, 11667Tecnimagen 10556Teco 10178, 10653Tedelex 10208, 11709
Remote Control Codes16Technics 10556Thomson 10625DVD3D LAB 30539Accurian 30675Acoustic Solutions 30713AEG 30675AFK 31152Aiwa 30533Akai 30675Alba 30539
Remote Control Codes17Radionette 30741Radiotone 30713RCA 30522, 30571, 32213, 32587REC 30490Red 32213Redstar 31394Roadstar 30713Rotel 30623Salora 3074
Remote Control Codes18Victor 31597Yamaha 30646Zenith 30741HD-DVDIntegra 32901, 33104 33504LG 30741Microsoft 32083Onkyo 32901, 33104 33504Xbox 32083TV/
Remote Control Codes19Memo
SN 29401094(C) Copyright 2012 ONKYO SOUND & VISION CORPORATION Japan. All rights reserved.* 2 9 4 0 1 0 9 4 *Y1112-1
ConnectionsEn-17Using Dipole SpeakersYou can use dipole speakers for the surround and surround back speakers. Dipole speakers output the same sound in
ConnectionsEn-18Bi-amping the Front SpeakersBi-amping provides improved bass and treble performance.When bi-amping is used, the AV receiver is able to
ConnectionsEn-19 Speakers A Speakers BConnecting a Power AmplifierIf you want to use a more powerful power amplifier, you can use the AV receiver as
En-2Safety Information and IntroductionImportant Safety Instructions1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Foll
ConnectionsEn-20Connecting AV componentsa*1If your TV doesn’t support Audio Return Channel (ARC), you need to connect an optical digital cable togethe
ConnectionsEn-21*If your TV doesn’t support Audio Return Channel (ARC), you need to connect an optical digital cable together with the HDMI cable to t
ConnectionsEn-22Connecting Your ComponentsThe on-screen menus appear only on a TV that is connected to HDMI OUT MAIN. If your TV is connected to other
ConnectionsEn-23Note*1TX-NR5010 only.*2Do not connect the AV receiver’s USB port to a USB port on your computer. Music on your computer cannot be play
ConnectionsEn-24This section explains how to connect the supplied indoor FM antenna and AM loop antenna.The AV receiver won’t pick up any radio signal
ConnectionsEn-25With u (Remote Interactive), you can use the following special functions: Auto Power OnWhen you start playback on a component connect
En-26Turning On & Basic OperationsTurning On/Off the AV ReceiverTip•The HYBRID STANDBY indicator may light depending on the status of settings (➔
Turning On & Basic OperationsEn-27Initial Setup This section explains the settings that we recommend you to make before using the AV receiver for
Turning On & Basic OperationsEn-28This step checks the connection of source components. With this step, you can enter remote control codes for the
Turning On & Basic OperationsEn-29Playback Operating with the remote controller Operating on the AV receiverThe on-screen information appears on
Safety Information and IntroductionEn-3Precautions1. Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal
Turning On & Basic OperationsEn-30Tip• See “Controlling Other Components” about the operation of other components (➔ page 94).Note• The buttons yo
Turning On & Basic OperationsEn-31This section describes icons that appear on the AV receiver’s display during media playback.This section explain
Turning On & Basic OperationsEn-32Extended Mode (Music) ControlThe music content information is displayed (lists are displayed), and you can contr
Turning On & Basic OperationsEn-33Internet radio URLs in the following formats are supported: PLS, M3U, and podcast (RSS). However, depending on t
Turning On & Basic OperationsEn-34The layout of icons can be customized by switching their positions on the network service screen.This section ex
Turning On & Basic OperationsEn-35Remote Playback means you can play the music files stored on a media server or personal computer with the AV rec
Turning On & Basic OperationsEn-36This section explains how to play music files on a computer or NAS (Network Attached Storage) through the AV rec
Turning On & Basic OperationsEn-37Using the TunerWith the built-in tuner you can enjoy AM and FM radio stations. You can store your favorite stati
Turning On & Basic OperationsEn-38 Selecting Presets Deleting PresetsListening to HD Radio™ Stations (North American models)HD Radio technology
Turning On & Basic OperationsEn-39 Setting the Blend ModeHD Radio transmissions contain analog and digital signals. If available, the digital sig
Safety Information and IntroductionEn-4For Canadian ModelsNOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.For models having a pow
Turning On & Basic OperationsEn-40Note• In some cases, the text characters displayed on the AV receiver may not be identical to those broadcast by
Turning On & Basic OperationsEn-41You can listen to the audio of one input source while watching the video of another. This function takes advanta
Turning On & Basic OperationsEn-42Using Basic FunctionsWith the supplied calibrated microphone, Audyssey MultEQ®XT32 automatically determines the
Turning On & Basic OperationsEn-431Turn on the AV receiver and the connected TV.On the TV, select the input to which the AV receiver is connected.
Turning On & Basic OperationsEn-44Note• You can cancel Audyssey MultEQ XT32 Room Correction and Speaker Setup at any point in this procedure simpl
Turning On & Basic OperationsEn-45Changing the Speaker Setup ManuallyYou can manually make changes to the settings found during Audyssey MultEQ®XT
Turning On & Basic OperationsEn-46About Listening ModesThe AV receiver’s listening modes can transform your listening room into a movie theater or
Turning On & Basic OperationsEn-47*1After enabling the corresponding speakers, press RECEIVER followed by SP (speaker layout) repeatedly to select
Turning On & Basic OperationsEn-48 Onkyo-Original DSP Listening ModesListening Mode Description Input SourceSpeaker LayoutOrchestra Suitable for
Turning On & Basic OperationsEn-49 Listening ModesListening Mode Description Input SourceSpeaker LayoutPure Audio*1In this mode, the display and
Safety Information and IntroductionEn-5Supplied AccessoriesMake sure you have the following accessories:*In catalogs and on packaging, the letter at t
Turning On & Basic OperationsEn-50Dolby Pro Logic IIx*7Dolby Pro Logic IIDolby Pro Logic IIx expands any 2-channel source for 7.1-channel playback
Turning On & Basic OperationsEn-51• Dolby Pro Logic II/IIx*7 Movie + Audyssey DSX• Dolby Pro Logic II/IIx*7 Music + Audyssey DSX• Dolby Pro Logic
Turning On & Basic OperationsEn-52Note*1Pure Audio cannot be selected when Zone 2/3 is active. Besides, if you activate Zone 2/3 while Pure Audio
Turning On & Basic OperationsEn-53The Home menu provides quick access to frequently used menus. Network Service` With this selection, you can use
Turning On & Basic OperationsEn-54With the sleep timer, you can set the AV receiver to turn off automatically after a specified period.You can adj
Turning On & Basic OperationsEn-55The Whole House Mode is useful when you want to add extra background music to your home party; this allows you t
Turning On & Basic OperationsEn-56By using ACTIVITIES in Easy macro mode, you can sequentially operate Onkyo components via simple commands from a
En-57Advanced OperationsOn-screen SetupWith the AV receiver connected to a TV, there are two ways of changing the settings on-screen: using the Quick
Advanced OperationsEn-58 Listening Mode*7` You can select the listening modes that are grouped in the following categories: “MOVIE/TV”, “MUSIC”, “GAM
Advanced OperationsEn-59Speaker Levels Subwoofer 1` –15.0dB to 0.0dB to +12.0dB in 0.5 dB steps. Subwoofer 2*1` –15.0dB to 0.0dB to +12.0dB in 0.5 d
Safety Information and IntroductionEn-6Table of ContentsSafety Information and IntroductionImportant Safety Instructions ...
Advanced OperationsEn-60Music Optimizer Music Optimizer` Off ` OnThe Music Optimizer function enhances the sound qualityof compressed music files. Wh
Advanced OperationsEn-61Note• This procedure can also be performed on the AV receiver by using SETUP, the cursor and enter (middle) buttons.• During A
Advanced OperationsEn-62By way of optimized circuitry, this function reduces power consumption when the AV receiver is in standby mode. The HYBRID STA
Advanced OperationsEn-63Main Menu Input/Output AssignMonitor OutOn the “Monitor Out” settings, you can select whether or not to have the video sources
Advanced OperationsEn-64You can specify the output resolution for HDMI OUT MAIN and COMPONENT VIDEO MONITOR OUT so that the AV receiver upconverts the
Advanced OperationsEn-65Component Video InputIf you connect a video component to a component video input, you must assign that input to an input selec
Advanced OperationsEn-66Main Menu Speaker SetupHere you can check the settings made by Audyssey MultEQ XT32 Room Correction and Speaker Setup function
Advanced OperationsEn-67Note•“Speakers Type(Front A)” and “Speakers Type(Front B)” cannot be set to “Bi-Amp” or “Digital Crossover” at the same time.•
Advanced OperationsEn-68Note*1“Full Band” can be selected only when “Full Band” is selected in the “Front” setting.*2When the “Powered Zone 3” setting
Advanced OperationsEn-69Speaker DistanceHere you can specify the distance from each speaker to the listening position so that the sound from each spea
Safety Information and IntroductionEn-7FeaturesAmplifier(TX-NR5010)• 145 Watts/Channel @ 8 ohms (FTC)• 220 Watts/Channel @ 6 ohms (IEC)(TX-NR3010)• 14
Advanced OperationsEn-70Equalizer SettingsWith the Equalizer settings, you can adjust the tone of speakers individually with a 7-band equalizer. The v
Advanced OperationsEn-71The HDMI connection in your system is used to deliver uncompressed digital audio and video information from one device to the
Advanced OperationsEn-72 High Phase, Low Phase` 0º ` 180º:With this setting, you can adjust the phase of tweeters and woofers.Tip• Sounds processed b
Advanced OperationsEn-73Center Width` 0 to 3 to 7With this setting, you can adjust the width of the sound from the center speaker when using the Dolby
Advanced OperationsEn-74 Half Mode` Off` On The Half Mode parameter turns Dolby Volume Half Mode processing on and off.In off mode, Dolby Volume appl
Advanced OperationsEn-75LFE Level Dolby Digital*1, DTS*2, Multich PCM, Dolby TrueHD, DTS-HD Master Audio, DSD*3` –QdB, –20dB, –10dB, or 0dBWith these
Advanced OperationsEn-76Main Menu Source SetupItems can be set individually for each input selector.Audyssey® Audyssey` Off ` Movie:Select this sett
Advanced OperationsEn-77IntelliVolume IntelliVolume` –12dB to 0dB to +12dB in 1 dB steps.With IntelliVolume, you can set the input level for each inp
Advanced OperationsEn-78Tip• To name a radio preset, use TUNER to select AM or FM, and then select the preset (➔ page 38).• To restore a name to its d
Advanced OperationsEn-79The receiver has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (I
Safety Information and IntroductionEn-8Front & Rear PanelsFront Panel(North American models) (European models)d ecfghba ij l m o p tq snu w x yvk
Advanced OperationsEn-80 Saturation*1*4*6` –50 to 0 to +50With this setting, you can adjust saturation. “–50” is the weakest color. “+50” is the stro
Advanced OperationsEn-81Setting the Incoming Digital Signal (Fixed Mode) Fixed Mode` Off:The format is detected automatically. If no digital input si
Advanced OperationsEn-82 Dolby D/Dolby D Plus/TrueHDWith this setting, you can specify the listening mode used when Dolby Digital or Dolby Digital Pl
Advanced OperationsEn-83OSD Setup On Screen Display` On ` OffThis preference determines whether operation details are displayed on-screen when an AV
Advanced OperationsEn-84 HDMI Through` Off ` BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2, PC, AUX, TV/CD, PHONO:Selects the input source for which the HDM
Advanced OperationsEn-85 InstaPrevueThese settings apply to “InstaPrevue” of the Home menu (➔ page 53) and specify the preview display of HDMI video
Advanced OperationsEn-86 DNS ServerEnter the DNS server address provided by your ISP. Proxy URLTo use a Web proxy, enter its URL here. Proxy PortIf
Advanced OperationsEn-87Multi ZoneIn addition to the main listening room, you can also enjoy playback in the other room, or as we call Multi Zone. And
Advanced OperationsEn-88Connecting the Zone Speakers to an Additional AmplifierThis setup allows 9.2-channel playback in your main listening room and
Advanced OperationsEn-89 Operating on the AV receiverTip• The Whole House Mode function shares the input source of main room with Multi Zone (➔ page
Safety Information and IntroductionEn-9For detailed information, see the pages in parentheses.a 8ON/STANDBY button (26)b Remote control sensor (5)c Di
Advanced OperationsEn-90Muting Zones Operating on the remote controllerTip• To unmute, press ZONE followed by MUTING again. Zones can also be unmuted
Advanced OperationsEn-91Using a Multiroom Kit with a CabinetIn this setup, the IR receiver picks up the infrared signals from the remote controller an
En-92Controlling Other ComponentsiPod/iPhone Playback via Onkyo DockRI DockWith the RI Dock, you can easily play the music of your iPod/iPhone, or wat
Controlling Other ComponentsEn-93By pressing the REMOTE MODE button that’s been programmed with the remote control code for your Dock, you can control
Controlling Other ComponentsEn-94Controlling Other ComponentsYou can use the AV receiver’s remote controller to control your other AV components, incl
Controlling Other ComponentsEn-95You’ll need to enter a code for each component that you want to control.Note• Though the provided remote control code
Controlling Other ComponentsEn-96Onkyo components that are connected via u are controlled by pointing the remote controller at the AV receiver, not th
Controlling Other ComponentsEn-97Controlling MHL-Enabled Mobile DeviceBy programming the supplied remote controller with the appropriate remote contro
Controlling Other ComponentsEn-98 DVD player/DVD recorder operation VCR/PVR operation Cassette tape deck operation Satellite receiver/Cable receiv
Controlling Other ComponentsEn-99The AV receiver’s remote controller can learn the commands of other remote controllers. By transmitting, for example,
Kommentare zu diesen Handbüchern