Onkyo HT-r591 Bedienungsanleitung PDF herunterladen (Seite 43)

Advanced Operations

En-43

■ Surround Back Ch

` 1ch:

Select if only one surround back speaker is

connected.

` 2ch

Select if two (left and right) surround back speakers

are connected.

Note

• If the “Surround Back” setting is set to “None”, this setting

cannot be selected.

■ Crossover (Crossover Frequency)

This setting is advantageous for the speakers that you

specified as “Small” in the “Sp Config (Speaker

Configuration)” (➔ page 42). To get the best bass

performance from your speaker system, you need to set

the crossover frequency according to the size and

frequency response of your speakers.

` 40Hz, 50Hz, 60Hz, 70Hz, 80Hz, 90Hz, 100Hz,

120Hz, 150Hz, 200Hz

Use the diameter of the smallest speaker in your system

when choosing the crossover frequency.

Choose the setting suitable for the speaker.

Note

• For a more accurate setting, look up the frequency response in the

manuals supplied with your speakers and set accordingly.

• Choose a higher crossover frequency if you want more sound

from your subwoofer.

■ Double Bass

` On

` Off

Turn this setting on to boost bass output by feeding bass

sounds from the front left, right, and center channels to the

subwoofer.

Note

• When the “Subwoofer” setting is set to “No” or the “Front”

setting to “Small”, this setting is fixed to “Off” (➔ page 42).

• This setting is set to “On” automatically when the “Subwoofer”

and “Front” settings are set for the first time to “Yes” and

“Large” respectively.

Menu Sp Distance

Here you can specify the distance from each speaker to the

listening position so that the sound from each speaker

arrives at the listener’s ears as the sound designer intended.

Note

• These settings are not available in either of the following cases:

– A pair of headphones is connected.

–The “Audio TV Out” setting is set to “On” (➔ page 50).

–“HDMI Ctrl (RIHD)” is set to “On” (➔ page 49) and you’re

listening through your TV speakers.

■ Unit

` feet:

Distances can be set in feet. Range: 1ft to 30ft in

1 foot steps.

` meters:

Distances can be set in meters. Range: 0.3m to 9.0m

in 0.3 meter steps.

(The default setting varies from country to country.)

■ Left, Front High Left, Center, Front High Right,

Right, Surround Right, Surr Back Right, Surr

Back Left, Surround Left, Subwoofer

` Specify the distance from the each speaker to your

listening position.

Note

• Speakers that you set to “No” or “None” in the “Sp Config

(Speaker Configuration)” (➔ page 42) cannot be selected.

Speaker cone diameter Crossover frequency

Over 8 in. (20 cm)

40/50/60 Hz

6-1/2 to 8 in. (16 to 20 cm)

70/80/90 Hz

5-1/4 to 6-1/2 in. (13 to 16 cm) 100 Hz

3-1/2 to 5-1/4 in. (9 to 13 cm) 120 Hz

Under 3-1/2 in. (9 cm)

150/200 Hz

This setting is NOT set automatically by

Audyssey 2EQ

Room Correction and Speaker Setup

(➔ page 27).

Sp Distance (Speaker Distance)

This setting is set automatically by Audyssey 2EQ Room

Correction and Speaker Setup (➔ page 27).

123456

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 79 80

Kommentare zu diesen Handbüchern

Keine Kommentare

Onkyo HT-r591 Bedienungsanleitung Seite 43

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger und Verstärker Onkyo HT-r591