Onkyo TX-NR808 Bedienungsanleitung

AV ReceiverTX-NR808Instruction ManualThank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and p

10En(North American and Taiwan models)(European, Australian and Asian models)a DIGITAL IN COAXIAL and OPTICAL jacksb RS232 portTerminal for control.c

SN 29400329Y1004-1(C) Copyright 2010 ONKYO CORPORATION Japan. All rights reserved.* 2 9 4 0 0 3 2 9 *Sales & Product Planning Di

11EnRemote ControllerFor detailed information, see the pages in parentheses.a STANDBY button (➔ 24)b ON button (➔ 24)c ACTIVITIES buttons (ALL OFF, MY

12EnAbout Home TheaterThanks to the AV receiver’s superb capabilities, you can enjoy surround sound with a real sense of movement in your own home—jus

13EnConnectionsConnecting the AV ReceiverSpeaker ConfigurationThe following table indicates the channels you should use depending on the number of spe

14EnConnecting the Speaker CablesScrew-type speaker terminalsUsing Banana Plugs (North American models)• If you are using banana plugs, tighten the sp

15EnUsing Dipole SpeakersYou can use dipole speakers for the surround and surround back speakers. Dipole speakers output the same sound in two directi

16EnIf you want to use a more powerful power amplifier and use the AV receiver as a preamp, connect it to the PRE OUT jacks, and connect all speakers

17EnConnected image with AV components• Before making any AV connections, read the manuals supplied with your AV components.• Don’t connect the power

18EnConnect your components to the appropriate jacks. The default input assignments are shown below.✔: Assignment can be changed (➔ 42).Refer to “Abou

19EnConnect your components to the appropriate jacks. The default input assignments are shown below.✔: Assignment can be changed (➔ 44).Connecting You

2EnIntroductionImportant Safety Instructions1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. D

20EnNote*1Connect a turntable (MM) that has built-in a phono preamp to TV/CD IN or connect it to PHONO IN with the phono preamp turned off. If your tu

21EnThis section explains how to connect the supplied indoor FM antenna and AM loop antenna.The AV receiver won’t pick up any radio signals without an

22EnThe AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the

23EnNote•The “Monitor Out” setting will be automatically switched to “Analog” (➔ 42) if not connected to both outputs when “Both” is selected or if no

24EnTurning On & Basic OperationsTurning On/Off the AV Receiver(European, Australian and Asian models)To completely shut down the AV receiver, set

25EnBasic OperationsYou can determine the language used for the onscreen setup menus. See “Language” in the “OSD Setup” (➔ 55). Operating on the AV r

26EnYou can temporarily mute the output of the AV receiver.Tip• To unmute, press MUTING again or adjust the volume.• The Mute function is cancelled wh

27EnNote*1If Pure Audio or Direct listening mode is selected, “Dynamic EQ” and “Dynamic Volume” cannot be selected.*2Only when you have selected “Cust

28En*1Depending on the start-up time of Blu-ray Disc/DVD player, the AV receiver may not activate this playback command. In this case, press 1 on the

29EnNote• Make the room as quiet as possible. Background noise and Radio Frequency Interference (RFI) can disrupt the room measure-ments. Close window

3EnPrecautions1. Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyri

30EnNote• When Audyssey MultEQ® Room Correction and Speaker Setup is complete, the “Equalizer” will be set to “Audyssey” (➔ 47). The Audyssey indicato

31EnListening to the RadioWith the built-in tuner you can enjoy AM and FM radio stations. You can store your favorite stations as presets for quick se

32EnYou can store a combination of up to 40 of your favorite FM/AM radio stations as presets.Note• You can name your radio presets for easy identifica

33EnFinding Stations by Type (PTY)You can search for radio stations by type.Listening to Traffic News (TP)You can search for stations that broadcast t

34EnRecordingThis section explains how to record the selected input source to a component with recording capability, and how to record audio and video

35EnUsing the Listening ModesSee “About Listening Modes” for detailed information about the listening modes (➔ 36).Listening Mode ButtonsMOVIE/TV butt

36EnThe AV receiver’s listening modes can transform your listening room into a movie theater or concert hall, with high fidel-ity and stunning surroun

37EnListening ModesListening Mode Description Input SourceSpeaker LayoutPure Audio In this mode, the display and video circuitry are turned off, minim

38EnDTS-HD High Resolution Audio(Continued from the previous page.)DXCNFXCN*1DTS-HD Master AudioDXCNFXCN*1DTS ExpressSDXCNDSD*6DXCNDTS 96/24*7This mod

39EnTHX Founded by George Lucas, THX develops stringent standards that ensure movies are reproduced in movie theaters and home theaters just as the di

4EnFor British modelsReplacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qual-ified service perso

40EnOnkyo-Original DSP Listening ModesNote*1Based on the audio channels contained in the source, the corresponding speakers will output the sound.*2If

41EnAdvanced OperationsAdvanced SetupThe on-screen setup menus appear on the connected TV and provide a convenient way to change the AV receiver’s var

42EnExplanatory NotesMain Menu Input/Output AssignMonitor OutIf you connect your TV to HDMI output, “Monitor Out” setting is automatically set so that

43EnNote• (North American and Taiwan models) If not connected to HDMI OUT, the “Monitor Out” setting will be automatically switched to “Analog” (➔ 23)

44EnHere are the default assignments. BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, TV/CD, PHONO, PORT` HDMI1, HDMI2, HDMI3, HDMI4, HDMI5, HDMI6:Select the HDM

45EnDigital Audio InputIf you connect a component to a digital audio input, you must assign that input to an input selector. For example, if you conne

46EnSpeaker ConfigurationWith these settings, you can specify which speakers are connected and a crossover frequency for each speaker. Specify “Full B

47En Left, Front Wide Left, Front High Left, Center, Front High Right, Front Wide Right, Right, Surr Right, Surr Back Right, Surr Back Left, Surr Lef

48EnTHX Audio SetupWith the “Surr Back Speaker Spacing” setting, you can specify the distance between your surround back speakers.If you’re using a TH

49EnMain menu Audio AdjustWith the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like.Multiplex/Mono Multi

5EnContentsImportant Safety Instructions ... 2Precautions...

50EnNote•If the “Surr Back” setting is set to “None” (➔ 46), this setting cannot be selected.•If the “Front High” or “Front Wide” setting is enabled (

51En Reference LevelAudyssey Dynamic EQ® Reference Level Offset` 0dB:It should be used when listening to movies.` 5dB:Select this setting for content

52EnIntelliVolume IntelliVolume` –12dB to 0dB to +12dB in 1 dB steps.With IntelliVolume, you can set the input level for each input selector individu

53EnPicture AdjustUsing “Picture Adjust”, you can adjust the picture qual-ity and reduce any noise appearing on the screen. To view the TV picture whi

54En Noise Reduction*2` Off:Noise reduction off.` Low:Low noise reduction.` Mid:Medium noise reduction.` High:High noise reduction.With this setting,

55En DTS/DTS-ES/DTS-HDWith this setting, you can specify the listening mode to be used when a DTS or DTS-HD High Resolution Audio format digital audi

56EnTunerFor FM/AM tuning to work properly, you must specify the FM/AM frequency step used in your area. Note that when this setting is changed, all r

57En• When the source equipment is connected with the u connec-tion, it may malfunction if “HDMI Control (RIHD)” is set to “On”. Audio Return Channel

58En Receiver` via NET:You can update the firmware via Internet. Check the network connection before update.` via USB:You can update the firmware fro

59EnLate NightWith the Late Night function, you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts even whe

6EnFeaturesAmplifier• 135 Watts/Channel @ 8 ohms (FTC)• 180 Watts/Channel @ 6 ohms (IEC)• 230 Watts/Channel @ 6 ohms (JEITA)• WRAT–Wide Range Amplifie

60EnAudio SelectorYou can set priorities of audio output when there are both digital and analog inputs. Audio Selector` ARC:The audio signal from you

61EnNET/USBThe AV receiver is network-ready, which means you can hook it up to your home network with a standard Ethernet cable and enjoy the music fi

62EnTo receive Internet radio, you must connect the AV receiver to a network with Internet access (➔ 61).You can select Internet radio stations by con

63EnRegistering Presets*1Once you’ve added a station to the list, simply select it on the Internet Radio screen, and then press ENTER to start playbac

64EnRandom PlaybackThe Random function can only be set while the PLAY screen is displayed.To play songs in random order, during playback (or while pla

65En WMA Lossless• Sampling rates of 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz and bitrates of between 5 kbps and 320 kbps are sup-ported. Incompatible file

66EnRemote Playback means you can play the music files stored on the DLNA-certified device such as media server with this product by operating the con

67EnNote• When modifying network settings, after modifying it is neces-sary to execute “Save”.This section explains how to configure the AV receiver’s

68En Proxy PortIf you’re using a Web proxy, enter a proxy port number here. ControlThis setting enables or disables control over the network.` Enabl

69EnRandom PlaybackThe Random function can only be set while the PLAY screen is displayed.To play songs in random order, while the list of songs is di

7EnTo receive HD Radio broadcasts, you must install an Onkyo UP-HT1 HD Radio tuner module (sold separately).*8In Europe, using banana plugs to connect

70EnMulti ZoneIn addition to your main listening room, you can also enjoy playback in the other room, or as we call Multi Zone. And, you can select a

71EnConnecting Your Zone 3 Speakers to an Amp in Zone 3This setup allows 7.1-channel playback in your main lis-tening room and 2-channel stereo playba

72EnNote• This procedure can also be performed on the AV receiver by using SETUP, arrows, and ENTER. Zone2 Out, Zone3 Out` Fixed: The Zone 2/3 volume

73EnControlling Zone 2/3 with the Remote ControllerNote• To control Zone 2/3, you must press the remote controller’s ZONE first.• ZONE turns red while

74EnTo control the AV receiver with the remote controller while you’re in Zone 2 or Zone 3, you’ll need a commer-cially available multiroom remote con

75EnControlling iPod & Other ComponentsControlling iPodUSB can be used to play music files stored on iPod/iPhone, which can be plugged into the AV

76En*2The following iPod models are not supported in Standard Mode. These iPod models can only be controlled in Extended Mode.*3When you disconnect th

77EnUP-A1 DockWith the UP-A1 Dock, you can easily play the music, photo, or movie stored on your Apple iPod through the AV receiver and enjoy great so

78EnRI DockWith the RI Dock, you can easily play the music stored on your Apple iPod through the AV receiver and enjoy great sound, and watch iPod sli

79En✔: Available buttons• With some iPod models, generations and RI Docks, certain buttons may not work as expected.• For detailed operation of the iP

8EnFront & Rear PanelsThe actual front panel has various logos printed on it. They are not shown here for clarity.The page numbers in parentheses

80EnControlling Other ComponentsYou can use the AV receiver’s remote controller (RC-771M) to control your other AV components, includ-ing those made b

81En8When you have a network connection, select the brand name again, and then press ENTER.When you do NOT have a network connection, use q/w to selec

82EnYou’ll need to enter a code for each component that you want to control.Note• The remote control codes provided are correct at the time of printin

83EnYou can reset a REMOTE MODE to its default remote control code.You can reset the remote controller to its default settings.By pressing REMOTE MODE

84EnNote• With some components, certain buttons may not work as expected, and some may not work at all.✔: Available buttons*1The p function is not sup

85EnVia onscreen menu, you can specify what actions will be taken by the Easy macro command in the Easy macro mode (➔ 27).Here are the default setting

86EnThe AV receiver’s remote controller can learn the com-mands of other remote controllers. By transmitting, for example, the Play command from your

87EnNote• The following buttons cannot learn new commands: REMOTE MODE, ALL OFF, MY MOVIE, MY TV, MY MUSIC.• The remote controller can learn approxima

88EnOthersTroubleshootingIf you have any trouble using the AV receiver, look for a solution in this section. If you can’t resolve the issue your-self,

89En Only the center speaker produces sound The surround speakers produce no sound The center speaker produces no sound The front high, front wide

9EnThe page numbers in parentheses show where you can find the main explanation for each item.l PHONES jack (➔ 27)m ZONE 2, ZONE 3 and OFF buttons (➔

90En There’s no picture There’s no picture from a source connected to an HDMI IN The on-screen menus don’t appear The picture is distorted The on

91En Can’t learn commands from another remote controller Can’t record There’s no sound The Zone 2 speakers produce no sound Can’t access the serv

92En The u functions don’t work The functions System On/Auto Power On and Direct Change don’t work for components connected via u When performing “

93EnSpecificationsAmplifier SectionVideo SectionTuner SectionGeneral HDMI Video Inputs Video Outputs Audio InputsRated Output Power All channels:(

94En Audio Outputs OthersSpecifications and features are subject to change without notice.Analog VCR/DVR, ZONE 2/3 PRE OUTAnalog Multichannel Pre Ou

95EnAbout HDMIDesigned to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard fo

96EnUsing an RIHD-compatible TV, Player, or Recorderp, which stands for Remote Interactive over HDMI, is the name of the system control function found

97En How to connect and setup1Confirm the connecting and setting.1. Connect the HDMI OUT or HDMI OUT MAIN jack to the HDMI input jack of the TV.2. Co

98EnVideo Resolution ChartThe following tables show how video signals at different resolutions are output by the AV receiver.NTSC/PAL✔: Output*1Availa

99EnMemo