Onkyo TX-SR600 Bedienungsanleitung PDF herunterladen (Seite 62)

Recording a source (TX-SR600/600E)

Notes:

• You cannot record the surround effects.

• Digital signals input to the DIGITAL INPUT (COAXIAL) and

DIGITAL INPUT (OPTICAL) inputs will be only output to the

DIGITAL OUTPUT (OPTICAL) output.

• There are some restrictions on recording digital signals. When

making digital recordings, consult the instruction manual that

came with your digital recording equipment (e.g., MD recorder

or DAT deck) to know what restrictions are imposed.

• You cannot record the source connected to the 5.1-channel input

jacks.

• If you change the input source during recording, you will record

the signals from the newly selected input source.

• Digital input signals are only output to the digital outputs and

analog input signals are only output to the analog outputs. There

is no conversion from digital to analog or vice versa. When

connecting CD players and other digital components, do not

connect only the digital terminals, but the analog ones as well.

To record the input source signal you are currently

watching or listening to

This method outputs to the audio and video outputs the currently

selected input source signal. This method allows you to a signal

while you are actually listening to or watching it.

1. Insert a media for recording into the recording

component (cassette tape deck, video deck, or MD

recorder).

2. Select the input source to record by pressing the

corresponding input source button.

3. Start the output source component and start

recording at the recording component as desired.

Input source buttons

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 79 80

Keine Kommentare

Onkyo TX-SR600 Bedienungsanleitung Seite 62