Onkyo TX-SR804E Bedienungsanleitung PDF herunterladen (Seite 83)

Zone 2

—Continued

If you’ve connected your Zone 2 speakers to this AV

receiver, as explained in “Using Only Speakers in

Zone 2” on page 82, you must set the “Powered Zone 2”

setting to “Act” (Activated) as explained here.

Note:

• This procedure can also be performed on the AV

receiver by using its [SETUP] button, arrow buttons,

and [ENTER] button.

This section explains how to turn Zone 2 on and off, how

to select an input source for Zone 2, and how to adjust

the volume for Zone 2.

Controlling Zone 2 from the AV receiver

Powered Zone 2 Setting

Press the [RECEIVER] REMOTE

MODE button, followed by the

[SETUP] button.

The main menu appears onscreen.

Use the Up and Down [ ]/[ ]

buttons to select “8. Hardware

Setup,” and then press [ENTER].

The Hardware Setup menu appears.

Use the Up and Down [ ]/[ ]

buttons to select “Powered

Zone2,” and use the Left and

Right [ ]/[ ] buttons to select:

Not Act:

ZONE 2 SPEAKERS termi-

nals not activated.

Act:

ZONE 2 SPEAKERS terminals

activated.

When Act is selected and Zone 2 is

turned on, the speakers connected to the

ZONE 2 SPEAKERS terminals will

output sound, but the speakers con-

nected to the SURROUND BACK

SPEAKERS terminals will not. When

Zone 2 is turned off, even if Act is

selected, the surround back speakers

will work as normal.

Press the [SETUP] button.

Setup closes.

RECEIVER

ENTER

8.Hardware Setup

------------------------

a.PoweredZone2:NotAct

b.TV Format :Auto

c.AM Freq. Step: 9kHz

d.Remote ID :1

a.PoweredZone2:NotAct

Using Zone 2

To turn on Zone 2 and select an

input source, press the [ZONE 2]

button repeatedly.

Alternatively, press the [ZONE 2]

button followed by an input

selector button within 8 seconds.

Zone 2 turns on, the ZONE 2 indicator

lights up, and the ZONE 2 12V TRIG-

GER OUT goes high (+12 V).

To select AM, FM, or XM (North

American model only), press the

[TUNER] input selector button repeat-

edly.

To select the same source as that of the

main room, press the [ZONE 2] button

repeatedly until “Zone 2 Sel: Source”

appears.

To turn off Zone 2, press the

ZONE 2 [OFF] button.

OFF TONEZONE 2

ZONE 2 LEVEL

PHONES

STEREO

DIMMER MEMORY

LISTENING MODE

TUNING

MODE

SETUP

PRESET PRESET

TUNING

RETURN

ENTER SETUP MIC

VIDEO

S VIDEO

DIGITAL

VIDEO 4 INPUT

AUDIOLR

CLEAR

STANDBY/ON

STANDBY

MASTER VOLUME

TAPE

ZONE 2

DISPLAY

PURE AUDIO

CDTUNER

VIDEO 4VIDEO 3VIDEO 2VIDEO 1

DVDMULTI CH PHONO

OFF

POWER

1 2

ZONE 2

OFF

TX-SR804/804E_En.book Page 83 Monday, September 4, 2006 9:34 AM

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

Onkyo TX-SR804E Bedienungsanleitung Seite 83

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger und Verstärker Onkyo TX-SR804E