Onkyo TX-SR804E Bedienungsanleitung PDF herunterladen (Seite 82)

Zone 2

With the Zone 2 function, you can enjoy one input

source in the main room and a different input source in

another room.

There are two ways to hook up your Zone 2 speakers:

1) Use an amp (receiver or integrated amp) in Zone 2 and

connect your Zone 2 speakers to it.

2) Connect your Zone 2 speakers to this AV receiver.

Using an Amp in Zone 2

With this hookup, you can enjoy 7.1-channel playback in

the main room and a different stereo source in Zone 2.

The volume for Zone 2 is set on the other amp.

Hookup

• Use an RCA audio cable to connect the AV receiver’s

ZONE 2 LINE OUT L/R jacks to an analog audio

input on the amp in Zone 2.

• Connect the Zone 2 speakers to the speaker terminals

on the amp in Zone 2.

Using Only Speakers in Zone 2

With this hookup, you can enjoy 5.1-channel playback in

the main room and a different stereo source in Zone 2.

The volume for Zone 2 is set on this AV receiver.

Hookup

• Connect your Zone 2 speakers to the AV receiver’s

ZONE 2 SPEAKERS terminals.

Zone 2 12V Trigger

When Zone 2 is turned on, the ZONE 2 12V TRIGGER

OUT goes high (+12 volts, 100 milliamperes max). Con-

necting this jack to a 12-volt trigger input on a compo-

nent in Zone 2 will turn that component on or off when

Zone 2 is turned on or off on this AV receiver.

Connecting Zone 2

Main room

Zone 2

Receiver/

integrated amp

AV receiver

You don’t need to make any settings to use this hookup.

Proceed to “Using Zone 2” on page 83.

Main room

Zone 2

AV receiver

You must set the “Powered Zone 2” setting to “Act”

(Activated) in order to use this hookup (see page 83).

TX-SR804/804E_En.book Page 82 Monday, September 4, 2006 9:34 AM

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

Onkyo TX-SR804E Bedienungsanleitung Seite 82

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger und Verstärker Onkyo TX-SR804E